CVE-2026-19676
PECI transfer syscall verifier does not validate embedded user buffer pointers, allowing arbitrary kernel memory read/write from user mode
Что произошло
The user-mode verifier for the peci_transfer() system call, z_vrfy_peci_transfer() in drivers/peci/peci_handlers.c, checked only the device object permission and copied the caller-supplied struct peci_msg with k_usermode_from_copy(). That copy validates the outer structure only; the buf pointers and len values inside the embedded struct peci_buf members tx_buffer and rx_buffer remained fully caller-controlled and were passed unchecked to the driver. Every in-tree PECI driver dereferences those pointers in supervisor mode: peci_npcx_transfer() in drivers/peci/peci_npcx.c and peci_it8xxx2_transfer() in drivers/peci/peci_ite_it8xxx2.c copy hardware bytes into rx_buffer.buf[i] and read command bytes out of tx_buffer.buf[i], and peci_xec_read()/peci_xec_write() in drivers/peci/peci_mchp_xec.c do the same with no bound on rx_buffer.len at all. A user-mode thread that has been granted the PECI device object — the normal way an application exposes a device under CONFIG_USERSPACE — could therefore point rx_buffer.buf at kernel data structures and have the driver write hardware-supplied bytes there, or point tx_buffer.buf at kernel memory and have its contents pushed onto the PECI/eSPI out-of-band bus. The impact is a full user-mode-to-kernel escape: an arbitrary kernel write primitive (integrity and, through it, code execution at supervisor privilege), an arbitrary kernel read disclosed to a PECI bus observer, and a trivially reachable supervisor-mode fault if an unmapped address is supplied. Exploitation requires CONFIG_USERSPACE=y, one of the PECI drivers enabled (CONFIG_PECI_NPCX, CONFIG_PECI_XEC or CONFIG_PECI_ITE_IT8XXX2), and local code execution in a user-mode thread holding the PECI device. The fix adds K_SYSCALL_MEMORY_READ() and K_SYSCALL_MEMORY_WRITE() checks over the two embedded buffers, with a size_add_overflow() guard on the frame-check-sequence byte accounted for in the RX length.
Что это значит
В источнике описана ошибка безопасности в перечисленных продуктах. Фактический риск зависит от установленной версии, конфигурации и доступности компонента; проверьте условия в первичном бюллетене.
Что делать
1. Проверьте, затронуты ли вы
Соберите инвентаризацию и сравните с таблицей затронутых версий. Эти команды только показывают установленные компоненты и сами по себе не доказывают наличие CVE.
dpkg-query -W -f='${Package} ${Version}\n'rpm -qa --qf '%{NAME}\t%{VERSION}-%{RELEASE}\n'Get-HotFix | Select-Object HotFixID, InstalledOn
2. Установите исправление
Сверьте точный продукт и версию с бюллетенем вендора. Установите указанное в нём исправление после резервного копирования и проверки совместимости. Подтверждённая целевая версия в источниках отсутствует.
3. Временные меры
До проверки бюллетеня ограничьте доступ к затронутому компоненту доверенными узлами. Оцените сегментацию и отключение ненужных интерфейсов с владельцем сервиса; универсального правила WAF для этой CVE не подтверждено.
4. Проверьте следы эксплуатации
Проверьте аномальные входы, новые учётные записи, ошибки и необычные дочерние процессы в затронутом сервисе. Публичные проверенные правила обнаружения не включены в запись; отсутствие сигналов не доказывает отсутствие компрометации.
5. После исправления
- Проверьте фактическую версию и результат установки по бюллетеню.
- При необходимости перезапустите сервисы в согласованное окно.
- Повторите проверку сканером и функциональные проверки.
- Зафиксируйте результат, дату, владельца и оставшийся риск.
Продукты и затронутые версии
zephyrproject / zephyr
{
"status": "affected",
"version": "2.3.0",
"lessThan": "4.3.2",
"versionType": "semver"
}{
"status": "affected",
"version": "4.4.0",
"lessThan": "4.5.0",
"versionType": "semver"
}CVSS: оценки и векторы
CVSS 3.1 · cve7.8
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
CVSS 3.1 · vulnerabilities@zephyrproject.org7.8
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Классы CWE
Источники и ссылки
Происхождение полей
{
"cwes": [
"cve",
"nvd"
],
"epss": {
"source": "epss",
"received_at": "2026-11-03T21:12:26.910336+00:00"
},
"title": {
"source": "cve",
"received_at": "2026-11-04T05:19:11.733221+00:00"
},
"scores": [
"cve",
"nvd"
],
"status": {
"source": "cve",
"received_at": "2026-11-04T05:19:11.733221+00:00"
},
"affected": [
"cve"
],
"published": {
"source": "cve",
"received_at": "2026-11-04T05:19:11.733221+00:00"
},
"solutions": [],
"percentile": {
"source": "epss",
"received_at": "2026-11-03T21:12:26.910336+00:00"
},
"references": [
"cve",
"nvd"
],
"description": {
"source": "cve",
"received_at": "2026-11-04T05:19:11.733221+00:00"
},
"workarounds": [],
"configurations": []
}Хронология записи
- Данные обновлены04.11.2026, 08:49
- Данные обновлены04.11.2026, 08:19
- Данные обновлены04.11.2026, 00:12
- Данные обновлены03.11.2026, 00:11
- Данные обновлены02.11.2026, 00:10
- Данные обновлены31.10.2026, 11:57
- Данные обновлены29.10.2026, 11:38
- Появились сведения об исправлении28.10.2026, 21:04
Личная заметка и статус
Другие CVE того же продукта
| УЯЗВИМОСТЬ / ПРОДУКТ | ПРИОРИТЕТ | CVSS | EPSS | СИГНАЛЫ | ОПУБЛИКОВАНА | Карточка |
|---|---|---|---|---|---|---|
| CVE-2026-87044 Memory leak in the Mbed TLS crypto shim on failed cipher/AEAD operations leads to remotely triggered crypto denial of service zephyrproject / zephyr | Средний | 6.5 | — | Патч | 04.11.2026 | |
| CVE-2026-87043 sys_rand_get() silently returns an unwritten buffer when the entropy device is not ready zephyrproject / zephyr | Средний | 4.8 | — | Патч | 04.11.2026 | |
| CVE-2026-87041 Inverted memory-permission check in the RTIO syscall verifier allows a user-mode thread to read and write arbitrary kernel memory zephyrproject / zephyr | Высокий | 7.8 | — | Патч | 04.11.2026 | |
| CVE-2026-87040 Bluetooth LE Controller accepts received PDUs whose length field exceeds the configured maximum receive length, causing out-of-bounds read and write zephyrproject / zephyr | Высокий | 8.3 | — | Патч | 04.11.2026 | |
| CVE-2026-87039 I2S configure syscall handler passes an unvalidated user-supplied kernel object pointer to drivers zephyrproject / zephyr | Высокий | 7.8 | — | Патч | 04.11.2026 |