Мониторинг Карточка CVE
Открытые данные
К списку уязвимостей
Высокий
Опубликована

CVE-2026-98256

signal: Prevent exec() race

Публикация: 06.10.2026·Обновлена: 19.10.2026, 12:16·Europe/Moscow

Что произошло

Автоперевод выключен · оригинальное описание

In the Linux kernel, the following vulnerability has been resolved: signal: Prevent exec() race Hyunwoo debugged the following KASAN UAF splat: BUG: KASAN: slab-use-after-free in __send_signal_locked+0xb27/0xba0 Write of size 8 at addr ffff888007ed80c8 by task poc/79 ... Call Trace: __send_signal_locked+0xb27/0xba0 do_send_sig_info+0xa7/0x160 do_send_specific+0x76/0xa0 __x64_sys_tgkill+0x193/0x270 ... Allocated by task 80: do_timer_create+0x1a4/0x1030 __x64_sys_timer_create+0x145/0x190 ... Freed by task 12: kmem_cache_free_bulk+0x1f8/0x4a0 kvfree_rcu_bulk+0x14f/0x1c0 kfree_rcu_work+0x128/0x1a0 ... Last potentially related work creation: kvfree_call_rcu+0x39/0x390 __flush_itimer_signals+0x211/0x320 flush_itimer_signals+0x47/0x90 begin_new_exec+0xa6b/0x28c0 It turned out that this happens with a non-leader exec() as Hyunwoo explained: de_thread() calls exchange_tids() before release_task(leader), so the struct pid held by a SIGEV_THREAD_ID timer created against the leader's tid now points to the thread which called execve(). pid_task() returns that thread and lock_task_sighand() on it succeeds. If the timer signal is blocked, its sigqueue stays queued on the leader's task::pending. The next expiry of that timer can then run while release_task() flushes the queue. posixtimer_send_sigqueue() checks whether the sigqueue is already queued with a plain list_empty(), which only reads list_head::next. list_del_init() is not atomic and INIT_LIST_HEAD() stores list_head::next before list_head::prev, so the check can pass in between. list_add_tail() queues the entry on the task::pending of the live thread, and the list_head::prev store from the flush then overwrites the list_head::prev link that list_add_tail() has just set. __flush_itimer_signals() does not undo that either. With list_head::prev pointing at the entry itself, its list_del_init() only stores the same values again, so the entry is not removed from the list. It is still there after the last reference is dropped and the timer is freed by RCU, and the list_add_tail() of a later tgkill() follows that list_head::prev into the freed timer. This problem surfaced with the recent commit which moved the sigqueue flush out of the sighand lock held region. Hyonwoo proposed to fix this by using list_del_init_careful(), but that just papers over the problem. After some disucssions and various attempts to solve it, Eric pointed out that there is no reason to flush task::pending late in release_task() and it should be done in exit_signals() already. As nothing can collect and deliver signals which are queued in a dying task's pending queue, there is no reason to delay it further. But it has to be ensured that no signals can be queued into it after that point. exit_signals() sets PF_EXITING in task::flags, which can be used as an indicator for this. Cure it by: - Preventing signal queueing for task private signals (PIDTYPE_PID) when the task has PF_EXITING set in __send_signal_locked() and in posixtimer_send_sigqueue(). - Protecting the unlocked setting of PF_EXITING in exit_signals() for the task group empty and the group exit case with sighand lock - Flushing task::pending signals right there. Optimize that by moving the whole pending list to an on-stack list head under sighand lock and free the signals without the lock held. There has been quite some discussion about the lockless flush and the non-leader exec case on weakly ordered systems. The problem is that a third party which tries to send a posix timer signal relies on the PID lookup to find the target task and that lookup might result in the new leader when the signal was originaly directed to the old leader. In case that the signal was queued on the old leader then the lockless flush raised a concern over the following situation: old_leader new_leader third party A: flush_list() // list_del_in ---truncated---

Что это значит

В источнике описана ошибка безопасности в перечисленных продуктах. Фактический риск зависит от установленной версии, конфигурации и доступности компонента; проверьте условия в первичном бюллетене.

Что делать

Редакционные пояснения, сведения источников и общие рекомендации помечены отдельно
Устранить в течение 7 дней

1. Проверьте, затронуты ли вы

Соберите инвентаризацию и сравните с таблицей затронутых версий. Эти команды только показывают установленные компоненты и сами по себе не доказывают наличие CVE.

Debian / Ubuntu
dpkg-query -W -f='${Package}	${Version}\n'
RHEL / AlmaLinux
rpm -qa --qf '%{NAME}\t%{VERSION}-%{RELEASE}\n'
Windows PowerShell
Get-HotFix | Select-Object HotFixID, InstalledOn
Общая рекомендация, не из бюллетеня вендора

2. Установите исправление

Сверьте точный продукт и версию с бюллетенем вендора. Установите указанное в нём исправление после резервного копирования и проверки совместимости. Подтверждённая целевая версия в источниках отсутствует.

Общая рекомендация, не из бюллетеня вендора

3. Временные меры

До проверки бюллетеня ограничьте доступ к затронутому компоненту доверенными узлами. Оцените сегментацию и отключение ненужных интерфейсов с владельцем сервиса; универсального правила WAF для этой CVE не подтверждено.

Общая рекомендация, не из бюллетеня вендора

4. Проверьте следы эксплуатации

Проверьте аномальные входы, новые учётные записи, ошибки и необычные дочерние процессы в затронутом сервисе. Публичные проверенные правила обнаружения не включены в запись; отсутствие сигналов не доказывает отсутствие компрометации.

Общая рекомендация, не из бюллетеня вендора

5. После исправления

  • Проверьте фактическую версию и результат установки по бюллетеню.
  • При необходимости перезапустите сервисы в согласованное окно.
  • Повторите проверку сканером и функциональные проверки.
  • Зафиксируйте результат, дату, владельца и оставшийся риск.

Продукты и затронутые версии

Linux / Linux

{
  "status": "affected",
  "version": "fb3bbcfe344e64a46574a638b051ffd78762c12d",
  "lessThan": "621c365739828900f32a0c1cdfe5387528a62176",
  "versionType": "git"
}
{
  "status": "affected",
  "version": "fb3bbcfe344e64a46574a638b051ffd78762c12d",
  "lessThan": "934bd95f1a6404dbb845951b823547abab05a649",
  "versionType": "git"
}
{
  "status": "affected",
  "version": "fb3bbcfe344e64a46574a638b051ffd78762c12d",
  "lessThan": "d2710c8d938ae6a825a6463158e6e6f31eac792a",
  "versionType": "git"
}

Linux / Linux

{
  "status": "affected",
  "version": "6.15"
}
{
  "status": "unaffected",
  "version": "0",
  "lessThan": "6.15",
  "versionType": "semver"
}
{
  "status": "unaffected",
  "version": "6.18.54",
  "versionType": "semver",
  "lessThanOrEqual": "6.18.*"
}
{
  "status": "unaffected",
  "version": "7.2.8",
  "versionType": "semver",
  "lessThanOrEqual": "7.2.*"
}
{
  "status": "unaffected",
  "version": "7.3",
  "versionType": "original_commit_for_fix",
  "lessThanOrEqual": "*"
}

CVSS: оценки и векторы

CVSS 3.1 · cve7.8
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
AV · Вектор атакилокальный доступ
AC · Сложность атакинизкая
PR · Привилегиинизкие
UI · Участие пользователяне нужно
S · Область воздействияне меняется
C · Конфиденциальностьвысокое
I · Целостностьвысокое
A · Доступностьвысокое

Источники и ссылки

Происхождение полей
{
  "cwes": [],
  "epss": {
    "source": "epss",
    "received_at": "2026-11-02T21:15:46.192986+00:00"
  },
  "title": {
    "source": "cve",
    "received_at": "2026-10-28T20:15:08.259884+00:00"
  },
  "scores": [
    "cve"
  ],
  "status": {
    "source": "cve",
    "received_at": "2026-10-28T20:15:08.259884+00:00"
  },
  "affected": [
    "cve"
  ],
  "published": {
    "source": "cve",
    "received_at": "2026-10-28T20:15:08.259884+00:00"
  },
  "solutions": [],
  "percentile": {
    "source": "epss",
    "received_at": "2026-11-02T21:15:46.192986+00:00"
  },
  "references": [
    "cve"
  ],
  "description": {
    "source": "cve",
    "received_at": "2026-10-28T20:15:08.259884+00:00"
  },
  "workarounds": [],
  "configurations": []
}

Хронология записи

  1. Данные обновлены03.11.2026, 00:15
  2. Данные обновлены02.11.2026, 00:13
  3. Данные обновлены31.10.2026, 12:00
  4. Данные обновлены29.10.2026, 12:47
  5. Опубликована28.10.2026, 23:15

Личная заметка и статус

Другие CVE того же продукта

УЯЗВИМОСТЬ / ПРОДУКТПРИОРИТЕТCVSSEPSSСИГНАЛЫОПУБЛИКОВАНАКарточка
CVE-2026-99270
tcp: Fix potential UAF in reqsk_timer_handler().
Linux / Linux
Высокий8.1
—
03.11.2026
CVE-2026-99269
sched_ext: Wait for SCX_OPSS_DISPATCHING before moving tasks off DSQs
Linux / Linux
Высокий7.8
—
03.11.2026
CVE-2026-99268
io_uring: wake ring pollers for local task_work
Linux / Linux
Информационный—
—
03.11.2026
CVE-2026-99267
io_uring/napi: make stale entries time out after 60s
Linux / Linux
Информационный—
—
03.11.2026
CVE-2026-99266
io_uring/zcrx: fix buffer offsets in areas above 4GB
Linux / Linux
Информационный—
—
03.11.2026
CVE-2026-98256: signal: Prevent exec() race · CVE Радар