CVE-2026-98616
eth: fbnic: reset num_napi when the napi vectors are freed
Что произошло
In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: reset num_napi when the napi vectors are freed fbn->num_napi is the count of live napi vectors, each of which owns an IRQ. The PM path had freed them without clearing the count. fbnic_pm_suspend() tears the datapath down via ndo_stop() and frees the IRQs, but leaves netif_running() true so resume knows to re-open. Resume rebuilds the datapath in __fbnic_pm_resume() and fbnic_reset_queues() sets num_napi and __fbnic_open() re-allocates the vectors. When the datapath is torn down but never rebuilt, num_napi is left pointing at freed vectors under 2 different scenarios: - a PCIe error recovery that fails (fbnic_err_slot_reset() -> __fbnic_pm_resume() returns an error -> PCI_ERS_RESULT_DISCONNECT), so .resume never runs; or - an __fbnic_open() that fails partway on resume and unwinds, freeing the vectors after fbnic_reset_queues() has already set num_napi. The netdev is then running with num_napi > 0 but napi[] freed, and the eventual remove/unbind close re-enters fbnic_down() -> fbnic_dbg_down() and dereferences the freed vectors: BUG: kernel NULL pointer dereference, address: 0000000000000210 RIP: fbnic_dbg_down+0x28 Clear num_napi when the vectors are freed: in the suspend teardown (a good resume re-establishes it before __fbnic_open()) and on the resume open failure. A redundant ndo_stop() then walks an empty napi[]. The normal ndo_stop() down/up cycle is untouched and keeps num_napi for the next ndo_open().
Что это значит
В источнике описана ошибка безопасности в перечисленных продуктах. Фактический риск зависит от установленной версии, конфигурации и доступности компонента; проверьте условия в первичном бюллетене.
Что делать
1. Проверьте, затронуты ли вы
Соберите инвентаризацию и сравните с таблицей затронутых версий. Эти команды только показывают установленные компоненты и сами по себе не доказывают наличие CVE.
dpkg-query -W -f='${Package} ${Version}\n'rpm -qa --qf '%{NAME}\t%{VERSION}-%{RELEASE}\n'Get-HotFix | Select-Object HotFixID, InstalledOn
2. Установите исправление
Сверьте точный продукт и версию с бюллетенем вендора. Установите указанное в нём исправление после резервного копирования и проверки совместимости. Подтверждённая целевая версия в источниках отсутствует.
3. Временные меры
До проверки бюллетеня ограничьте доступ к затронутому компоненту доверенными узлами. Оцените сегментацию и отключение ненужных интерфейсов с владельцем сервиса; универсального правила WAF для этой CVE не подтверждено.
4. Проверьте следы эксплуатации
Проверьте аномальные входы, новые учётные записи, ошибки и необычные дочерние процессы в затронутом сервисе. Публичные проверенные правила обнаружения не включены в запись; отсутствие сигналов не доказывает отсутствие компрометации.
5. После исправления
- Проверьте фактическую версию и результат установки по бюллетеню.
- При необходимости перезапустите сервисы в согласованное окно.
- Повторите проверку сканером и функциональные проверки.
- Зафиксируйте результат, дату, владельца и оставшийся риск.
Продукты и затронутые версии
Linux / Linux
{
"status": "affected",
"version": "bc6107771bb4be3009168cfda24d22131c026fe8",
"lessThan": "c5b5aee41b9f5ed0743344be1c7b544555fa3cb9",
"versionType": "git"
}{
"status": "affected",
"version": "bc6107771bb4be3009168cfda24d22131c026fe8",
"lessThan": "4f4b767ffea7653a00904383908536e754f8ef5b",
"versionType": "git"
}{
"status": "affected",
"version": "bc6107771bb4be3009168cfda24d22131c026fe8",
"lessThan": "4bcc4a92c603fe7f062cea22e20da2e0ad6b12c3",
"versionType": "git"
}Linux / Linux
{
"status": "affected",
"version": "6.11"
}{
"status": "unaffected",
"version": "0",
"lessThan": "6.11",
"versionType": "semver"
}{
"status": "unaffected",
"version": "6.18.55",
"versionType": "semver",
"lessThanOrEqual": "6.18.*"
}{
"status": "unaffected",
"version": "7.2.9",
"versionType": "semver",
"lessThanOrEqual": "7.2.*"
}{
"status": "unaffected",
"version": "7.3",
"versionType": "original_commit_for_fix",
"lessThanOrEqual": "*"
}CVSS: оценки и векторы
Оценка CVSS отсутствует.
Источники и ссылки
Происхождение полей
{
"cwes": [],
"epss": {
"source": "epss",
"received_at": "2026-11-01T21:13:21.057111+00:00"
},
"title": {
"source": "cve",
"received_at": "2026-10-28T20:15:08.375723+00:00"
},
"scores": [],
"status": {
"source": "cve",
"received_at": "2026-10-28T20:15:08.375723+00:00"
},
"affected": [
"cve"
],
"published": {
"source": "cve",
"received_at": "2026-10-28T20:15:08.375723+00:00"
},
"solutions": [],
"percentile": {
"source": "epss",
"received_at": "2026-11-01T21:13:21.057111+00:00"
},
"references": [
"cve"
],
"description": {
"source": "cve",
"received_at": "2026-10-28T20:15:08.375723+00:00"
},
"workarounds": [],
"configurations": []
}Хронология записи
- Данные обновлены02.11.2026, 00:13
- Данные обновлены31.10.2026, 12:00
- Данные обновлены29.10.2026, 12:47
- Опубликована28.10.2026, 23:15
Личная заметка и статус
Другие CVE того же продукта
| УЯЗВИМОСТЬ / ПРОДУКТ | ПРИОРИТЕТ | CVSS | EPSS | СИГНАЛЫ | ОПУБЛИКОВАНА | Карточка |
|---|---|---|---|---|---|---|
| CVE-2026-99239 Bluetooth: L2CAP: refuse __l2cap_chan_add if chan already has conn Linux / Linux | Высокий | 7.8 | — | 02.11.2026 | ||
| CVE-2026-99234 tracing: Unregister field variable histograms when the command fails Linux / Linux | Информационный | — | — | 02.11.2026 | ||
| CVE-2026-99233 tracing/histograms: Verify event_call identity when updating synth_event refcount Linux / Linux | Высокий | 7.8 | — | 02.11.2026 | ||
| CVE-2026-99235 tracing: Save the event file instead of the compatible histogram Linux / Linux | Высокий | 7.8 | — | 02.11.2026 | ||
| CVE-2026-99238 tracing: Hold trace_types_lock when updating modules in persistent instances Linux / Linux | Высокий | 7.8 | — | 02.11.2026 |