CVE-2026-98878
irqchip/gic-v5: Immediately exec priority drop following activate
Что произошло
In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Immediately exec priority drop following activate With GICv5 an interrupt of equal or lower priority cannot be signalled until there has been a priority drop. This is done via the GIC CDEOI system instruction. Once this has been executed, the hardware is able to signal the next interrupt if there is one. As all interrupts are programmed to have the same priority, no new interrupts can be signalled until the priority drop has happened. This can cause issues when, for example, an interrupt remains active while a long running process takes place, such as when injecting a physical interrupt into a guest VM in software. The GICv5 driver has so far done the priority drop as part of irq_eoi(), i.e., at the same time as deactivating the interrupt. This means that any long running process (or VM) could block incoming interrupts, effectively causing a denial of service for all other interrupts. Rather than doing the EOI as part of irq_eoi() (which the name would suggest would be a good place for it), move it to happen immediately after acknowledging an interrupt in the main GICv5 interrupt handler. The deactivation of interrupts (GIC CDDI) remains implemented as part of irq_eoi(), which means that the same interrupt cannot be signalled a second time until deactivated by software.
Что это значит
В источнике описана ошибка безопасности в перечисленных продуктах. Фактический риск зависит от установленной версии, конфигурации и доступности компонента; проверьте условия в первичном бюллетене.
Что делать
1. Проверьте, затронуты ли вы
Соберите инвентаризацию и сравните с таблицей затронутых версий. Эти команды только показывают установленные компоненты и сами по себе не доказывают наличие CVE.
dpkg-query -W -f='${Package} ${Version}\n'rpm -qa --qf '%{NAME}\t%{VERSION}-%{RELEASE}\n'Get-HotFix | Select-Object HotFixID, InstalledOn
2. Установите исправление
Сверьте точный продукт и версию с бюллетенем вендора. Установите указанное в нём исправление после резервного копирования и проверки совместимости. Подтверждённая целевая версия в источниках отсутствует.
3. Временные меры
До проверки бюллетеня ограничьте доступ к затронутому компоненту доверенными узлами. Оцените сегментацию и отключение ненужных интерфейсов с владельцем сервиса; универсального правила WAF для этой CVE не подтверждено.
4. Проверьте следы эксплуатации
Проверьте аномальные входы, новые учётные записи, ошибки и необычные дочерние процессы в затронутом сервисе. Публичные проверенные правила обнаружения не включены в запись; отсутствие сигналов не доказывает отсутствие компрометации.
5. После исправления
- Проверьте фактическую версию и результат установки по бюллетеню.
- При необходимости перезапустите сервисы в согласованное окно.
- Повторите проверку сканером и функциональные проверки.
- Зафиксируйте результат, дату, владельца и оставшийся риск.
Продукты и затронутые версии
Linux / Linux
{
"status": "affected",
"version": "7ec80fb3f025825e860b433685fb801d6de34bf3",
"lessThan": "c29bb5acd0cad0b49399d1399dd1bacb39e41438",
"versionType": "git"
}{
"status": "affected",
"version": "7ec80fb3f025825e860b433685fb801d6de34bf3",
"lessThan": "abf60331ebe9a9a7937a72aac7699c2907ab9307",
"versionType": "git"
}Linux / Linux
{
"status": "affected",
"version": "6.17"
}{
"status": "unaffected",
"version": "0",
"lessThan": "6.17",
"versionType": "semver"
}{
"status": "unaffected",
"version": "6.18.53",
"versionType": "semver",
"lessThanOrEqual": "6.18.*"
}{
"status": "unaffected",
"version": "7.2",
"versionType": "original_commit_for_fix",
"lessThanOrEqual": "*"
}CVSS: оценки и векторы
Оценка CVSS отсутствует.
Источники и ссылки
Происхождение полей
{
"cwes": [],
"epss": {
"source": "epss",
"received_at": "2026-11-02T21:15:49.071443+00:00"
},
"title": {
"source": "cve",
"received_at": "2026-10-28T20:13:06.617339+00:00"
},
"scores": [],
"status": {
"source": "cve",
"received_at": "2026-10-28T20:13:06.617339+00:00"
},
"affected": [
"cve"
],
"published": {
"source": "cve",
"received_at": "2026-10-28T20:13:06.617339+00:00"
},
"solutions": [],
"percentile": {
"source": "epss",
"received_at": "2026-11-02T21:15:49.071443+00:00"
},
"references": [
"cve"
],
"description": {
"source": "cve",
"received_at": "2026-10-28T20:13:06.617339+00:00"
},
"workarounds": [],
"configurations": []
}Хронология записи
- Данные обновлены03.11.2026, 00:15
- Данные обновлены02.11.2026, 00:13
- Данные обновлены31.10.2026, 12:00
- Данные обновлены29.10.2026, 12:47
- Опубликована28.10.2026, 23:13
Личная заметка и статус
Другие CVE того же продукта
| УЯЗВИМОСТЬ / ПРОДУКТ | ПРИОРИТЕТ | CVSS | EPSS | СИГНАЛЫ | ОПУБЛИКОВАНА | Карточка |
|---|---|---|---|---|---|---|
| CVE-2026-99239 Bluetooth: L2CAP: refuse __l2cap_chan_add if chan already has conn Linux / Linux | Высокий | 7.8 | — | 02.11.2026 | ||
| CVE-2026-99234 tracing: Unregister field variable histograms when the command fails Linux / Linux | Информационный | — | — | 02.11.2026 | ||
| CVE-2026-99233 tracing/histograms: Verify event_call identity when updating synth_event refcount Linux / Linux | Высокий | 7.8 | — | 02.11.2026 | ||
| CVE-2026-99235 tracing: Save the event file instead of the compatible histogram Linux / Linux | Высокий | 7.8 | — | 02.11.2026 | ||
| CVE-2026-99238 tracing: Hold trace_types_lock when updating modules in persistent instances Linux / Linux | Высокий | 7.8 | — | 02.11.2026 |